Dark Screen on iPhone: The iPhone comes with some of the best monitors in the world. Brightness, contrast, and clarity of the image. All scores are top. But sometimes some users start brightness issues with these same displays. It looks like all the paint has been sucked off the iPhone.
The colors become dull, there is not enough backlight. Many begin to panic and immediately run to the service. But you can try to fix the problem yourself.
In fact, there are several simple solutions to this problem. Unfortunately, not everyone knows them. In this article, we will see what to do if your iPhone screen is dark.
Dark Screen on iPhone
iPhone Screen Brightness
The first thing to do if you don’t have enough screen brightness on your iPhone is to check what level the slider is responsible for that setting. You can do this in two places. To control room is called by swiping down from the upper right corner of the screen for smartphones with face identification. Or swipe up from the bottom of the screen for iPhones with touch ID. Or in the settings:
- Open Settings.
- Go to the “Display and brightness” section.
- Check the level of the brightness adjustment slider.
If the brightness is set to the minimum level, simply drag the slider to the control room or directly into the settings. The screen should become incomparably brighter and juicier. This level can be set Auto-Brightness. To deactivate it, you must:
- Open Settings.
- Go to “Universal Access”.
- Open the “Display and text size” section.
- Disable “Auto-Brightness”.
After the stop Auto Brightness, You will control the brightness yourself and it will not adapt to outdoor lighting. But you should think about why it didn’t work properly. If you are using on-screen protective glass and the problem arose from the moment of its gluing, then, most likely, it is installed askew and overlaps the light sensor.
In this case, it is better to remove it and check the operation of the automatic brightness without it. It is possible that everything is in order with the sensors, and improperly installed protection is to blame.
For the same reason, you need to hold the top of the iPhone screen, where the speaker is, to clean it. Otherwise, the light will simply not reach the sensor and the brightness will not be adjusted correctly.
The next reason dark display on iPhone is do not disturb mode. Most often it is used at night so that notifications do not distract users from sleep. At the same time, many people watch the time on their smartphones at night, and a bright backlight combined with a juicy image can be very unpleasant to hit your eyes in the dark.
As a concern, Cupertino has made a strong blurring of the wallpaper and dimmed the brightness of the screen when this mode is activated. Make sure you have activated “Do not disturb” you can use the crescent pictogram on the locked screen under the clock.
Sometimes users accidentally enable a special setting in universal access, which reduces color saturation. It’s called “White Dot Down”. If enabled, the screen will be dark even at maximum brightness. To deactivate it, you must:
- Go to settings.
- Open the “Universal Access” section.
- Select “Display and text size”.
- Disable “White point down”.
After turning it off, the screen will return to its usual brightness.
Replace the Screen on iPhone
There are many times when you need to use your iPhone outdoors in direct sunlight. In a separate article, we considered, “> how to prevent a smartphone from overheating in the sun.
But if it has ever happened iPhone gets hot, the system can forcibly dim the screen until the screen cools down. Any attempt to increase it manually will not lead to the desired result. Only reaching normal operating temperatures will help.
To check the performance of the display and sensor, we recommend factory resetting the iPhone and installing it like new. There may just be a bug in the software. To reset the iPhone, you must:
- Open Settings.
- Go to the “Basic” section.
- Scroll all the way down and open Transfer or reset iPhone.
- In the window that opens, select “Erase content and settings” and follow the on-screen instructions.
If everything was a software error, then by configuring your smartphone “like new” she will leave.
Nevertheless, one of the most common reasons for iPhone screen monotony is installing non-original and poor-quality screens. When the user crashes your iPhone in an attempt to save on repairs, the installed displays an unknown origin. And it’s one thing when it happens with the consent of the user.
Quite different when the services Center willfully misleads and establishes an outright infringement.
To determine which screen is installed on your iPhone, it will only turn out in an authorized service center. The assistants will be able to tell if your smartphone is really the original screen, and replace it with a real one, in which case. Of course, it will be quite expensive, but you will definitely not come across a fake.
I am Bhumi Shah, a highly skilled digital marketer with over 11 years of experience in digital marketing and content writing in the tech industry.