What to do if Apple Watch won’t turn on, Apple Watch problems are rare. The only thing that owners of this device usually complain about is poor battery life. For several years now, we have been unable to guarantee that Apple smartwatches will hold a charge for at least two full days.
However, incidents of a much larger scale sometimes occur with this accessory, for example when the Apple Watch simply refuses to turn on.
Whatever happens to your watch, you shouldn’t panic for sure. It is much better to check all possible settings, completely eliminate software errors and, if this does not solve the problem, contact a service center.
We tell you what to do if your Apple Watch won’t turn on.
How to tell if Apple Watch is charging?
It is clear that if Apple Watch won’t turn on, the first thing that every user thinks about is charging issues. After all, the clock can go down at any time and you can lose track of the apple watch’s low battery. Also, everyone knows that this gadget has big battery life issues.
To check if your Apple Watch is charging, put your watch on charge. After that, a special indicator in the form of a green lightning bolt should light up on the screen. It means your watch is charging. Occasionally to check the apple watch charge you may need to press and hold the side button. If the charging icon appears on the screen, everything is fine.
If, after charging the watch, Red lightning bolt icon on Apple Watch, no need to worry either. The point, most likely, is that your watch is simply discharged below 20%. Let the watch charge and in time red lightning on the apple watch will turn green.
If the charging cable icon and a red lightning bolt appear on the watch screen, simply leave the watch charging for 30 minutes. Most likely, after a while, they will turn on themselves. But if it happens that a black screen is on the Apple Watch and nothing happens even when you press the side button, then most likely the problem is a bit more serious.
Apple Watch has stopped charging
The reasons for which Apple Watch has stopped charging, a vast majority. All of them are divided into software and hardware.
It is clear that if you have recently dropped your watch from a great height or had a car run over it, we will not be able to help you, in which case you will have to contact the service center directly. If there was no mechanical damage on the Apple Watch, let’s try to fix the problem in a few simple steps:
- Make sure the charging cable is fully inserted into the charger and into the socket.
- If the watch is new, be sure to remove the film from the tablet on which you put your Apple Watch.
- Clean the back of the watch and the charging pad itself of any dirt with a dry cloth.
- Make sure that after placing the Apple Watch on the charging station, the position of the watch has been aligned with the magnets. This is usually heard as a small click.
- Check if your Apple Watch is charging with another charger. It is possible that the cause of the fault is in your cable. For testing use, only the original cable is included in the delivery.
How to force restart your Apple Watch?
If your Apple Watch won’t turn on, and all the previous tips don’t help, I suggest you try to force restart the Apple Watch. Apple itself recommends performing this procedure in an emergency. And, of course, in no case restart Apple Watch in this mode, if at this moment there is a watch OS update.
To force restart your Apple WatchYou will need:
- Simultaneously press the side button and the Digital Crown.
- Hold both buttons for 10 seconds until the apple icon appears.
- Wait for your watch to charge after restarting.
In principle, these tips are sufficient in most cases. Still, the Apple Watch isn’t a gadget that breaks down every other day. Most users don’t even install apps here, so problems are extremely rare. If the tips didn’t help, you should consider taking the watch to a service center, although there are a few more nuances.
Apple Watch 6 won’t turn on
More recently, on its official website, Apple announced that some models of Apple Watch Series 6 with a 40 mm screen are defective, which causes the watch to turn off when the battery is low. Devices covered by the warranty were manufactured between April and September 2021.
If you purchased the watch after this date, go to the support page and enter the serial number in the special column, then click submit. Then follow the instructions on the website.
Blinking Apple on Apple Watch
As I said, issues related to the Apple Watch not turning on are quite rare. During the use of smartwatches by me and my friends I, only encountered such situations a few times.
Most often, users complain that Apple Watch is stuck on Apple. In this case, the reason can lie in two problems: either a software error that can be solved without problems using a forced restart or by turning off VoiceOver.
You can turn off VoiceOver on your Apple Watch this way:
- Open the Watch app on your iPhone.
- Then go to Accessibility, Voice Over.
- Turn off the toggle switch in front of the item of the same name at the top of the iPhone screen.
How to factory reset your Apple Watch?
If that doesn’t work, try unpair with Apple Watch:
- Open the Watch app on your iPhone.
- Then go to the My Watch tab.
- In the upper left corner, click All Hours.
- Tap the “i” icon next to your Apple Watch.
- Tap Unpair Apple Watch.
- Enter your Apple ID password, and confirm the action.
In all other cases, we recommend that you contact the service center for professional assistance. In general, Apple Watches are not very repairable, so repairing them yourself or with third-party companies can sometimes be extremely difficult.
Masters simply do not undertake to repair watches. For this reason, always contact Apple directly first, then third-party services.
I am Bhumi Shah, a highly skilled digital marketer with over 11 years of experience in digital marketing and content writing in the tech industry.